Most Wanted Tips to Remove a Printer Clog

Most Wanted Tips to Remove a Printer Clog

You are not a rare person if you have a printer in your house. Millions of others have them and majorities of the people use the inkjet printers. The obvious reason behind this is of course the lower cost of the inkjet printers. Now, if you are using an inkjet printer, you may well experience a clog in the print head. This will result in the streak of missing colors in the printing.

Naturally, the clogs are very frustrating. One nasty thing with them is that you can only find out the clogging when you are in the middle of a printing. For sure then it becomes very difficult to take any precautions and this in turn increases the frustration of the users.

Color Printer

Now, if you wan to fix the problem, you need to know certain things. First of all, the print head is the place in the printer from where the ink comes out. There are certain methods that can remove the clog.

The first, and the simplest, way to do that is to use the head cleaning cycles. This is basically an in built feature in the printer. This is a specialized routine programmed specifically to solve this issue. When you use it, the cleaning cycle sends a strong signal to the printer and simultaneously draws a vacuum from beneath. The combined effect of these two mechanisms sucks the clogged ink from print head. In most of the case, using the cycle 3 to 5 times will solve the issue.

Now, the problem with using the cleaning cycle is that the procedure of conducting it varies from one manufacturer to another. This is why it is important to take the help of the user manual that comes along with your product. But what if you no longer have the manual? Well, you should visit the website of the manufacturer and get the online printer manual.

However, there are times when your printer gets too stubborn to yield to the cleaning cycles. In that case, you need to perform something else. In fact, there are various cleaners through which you can dissolve the ink clogged in the print head. Among the various products, Clog Buster is the one used frequently.

But then, it may well be that the clogging happens just at a time when you no longer have such a specialized solution. Now, you have to either wait for the product or you can do a simple thing. You can mix 50% ammonia with 50% distilled water to make a solution that will effectively clean off the clogged ink from the print head.

Now, here is a very important note for you. Ammonia is a very strong product. So, while working with it, make sure that you have enough ventilation and you are not mixing it with any other chemicals or liquids. Nevertheless, soak the print head for a couple of hours in the solution. You should also put some of the solution in the resting seat of the print head which is a rubber rectangle. If it does not work, repeat the task with 100% ammonia solution.

However keep in mind that you need to be updated with printer news to know more such about these cleaning techniques. So surf the internet for cartridge news to know more about such issues.

Friends Link : Lasko 5395